Why Fencing Aren’t As Bad As You Think

Procedures to Use in Building Split Rail Fencing

One of the early methods in fencing is the split rail fence, it is typical used to fence farmhouses. Those people who reside near the forests should know the importance of knowing the procedure for split rail fence installation. The reason is because the enclosure is often found in forested area since most of its readily available materials are found in the wooden area.

Despite the fact that this method is out of date, it is still appealing and attractive primarily to those who still keep with the tradition. This method is simple, economical and well-built. The installation is functional and the tools required are basic such as wedge, a pair of gloves, helmet, and axe. The very important thing about this method is that you can recycle your inoperative timbers and make it into a useful and beautiful enclosure.

Now before you install it, of course you need first to establish where you will put the fence. Be sure that the area is a safe one to excavate. Also, see to it that there is no gas, water or power line beneath the area you are supposed to dig up holes. These line are extremely hazardous to anyone in the area.

After deciding where to install the fence, the next thing you need to do is to measure the perimeter of the area you want to enclose. Be sure to put a mark on the boundary line to prevent confusion. You can use a ground stakes and make a clear outline by tying a guideline from one corner to following corners. By doing this, you will have a visible guideline and well-stretched line.

With your guideline still in position, set up your corner posts. Dig up a hole to place the split posts depth. To be exact, it should accommodate a third of the total length of the post. Then, put the concrete 24 inches deep and leave it for at least 72 hours. Be sure that the distance of your posts are at 10 to feet from one another. After you placed the post securely, make sure that the posts are positioned well and are in straight line.

Put a guide wire and be sure that the posts are placed vertically. The importance of setting up the wire is to see if the line is accurate based on its dimension and smoothness.
Measure the length of the posts and make sure that the sizes are similar as possible to maintain a spruce look. Split the post from its top to bottom using an axe.

Lastly, join each rail and split post using the hammer and drive nails. The fence will protect anything within from devastation and will maintain the beauty of the place.

The 10 Best Resources For Services

The 10 Best Resources For Services